Find the nearest Starwax distributor near you

Search

Starwax

Cement laitance remover

Ideal for removing traces of cement and lime scale

Removes end-of-site dirt and residues

Also effective against saltpetre and efflorescence

Immediate action: saves time

Suitable for wall or floor tiling

Ideal for cleaning floors after tiling

Have you just laid tiles and are still left with whitish deposits and cement residues from your joints? This could be cement film, cement laitance or efflorescence. Starter Cement laitance Remover eliminates the dirt and residue left behind at the end of the job (cement film, plaster residue, lime scale, rust, etc.) Its practical, concentrated acid formula works quickly and is also effective on saltpetre and efflorescence.

Starwax Cement laitance remover is used after tiling and grouting, whether it’s wall tiles or floor tiles in the kitchen, bathroom, living room and even outside the house (on a tiled terrace, for example), except for marble, limestone and unless contra-indicated by the manufacturer due to its acidic content, To clean a natural stone floor (marble, comblanchien, travertine, granito, terrazzo, slate…), use our cement stripper for marble and natural stone and our heavy-duty cleaning products.

How do I use Starwax cement laitance remover?

  • Wear protective gloves, protective clothing and eye and face protection.
  • Dilute 1L of product in 3 to 5L of water depending on the amount of cement laitance.
  • Apply with a mop or sponge, wetting the floor well.
  • Leave for 3 to 5 minutes, then rinse well with clean water.
  • In the event of very heavy deposits, it is preferable to make several applications rather than increasing the concentration.

Recommendations

  • Do not apply to surfaces sensitive to acids (marble, comblanchien, travertine, granito, terrazzo, iron, cast iron, wood, plants, slate, etc.). Use Starwax Special Marble Cement Voile Stripper.
  • First apply a test coat to an inconspicuous part of the surface.
  • Do not leave the site while the product is still working.
  • When brushing with a single-brush machine or scrubber-drier, use acid-resistant brushes.
  • Wear protective gloves, protective clothing and eye and face protection.
Reference : 5024
EAN13 : 3365000050248

Recommended products

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.