Find the nearest Starwax distributor near you

Search

Starwax

Degreaser for marble and natural stone

Ideal for occasional use: thorough degreasing of marble and natural stone floors

Removes old maintenance or renovation products

Ideal before renovation: leaves floors bare

Optimises the shine of Starwax Shine Renovator

Easy to apply with a mop

No rinsing

Degreaser Stripper is ideal for deep cleaning of your marble or natural stone floors. It can be used occasionally, especially before applying Starwax Gloss Renovator or Starwax Waterproofing for Porous Floors. It is particularly suitable for marble, travertine, comblanchien, Burgundy stone and blue stone. Practical, it can be applied with a mop and requires no rinsing.

How do I use the No-Rinse Pre-Renovation Degreaser?

  • Dilute 1L of Stripper in 4 to 5L of water.
  • Apply with a mop, wetting the floor well.
  • Leave to work for approx. 10 minutes.
  • Before drying, remove any residue with a squeegee or damp mop.
  • Allow to dry.
  • Repeat if necessary.

Recommendations

  • Use only for its intended purpose.
  • Test first.
  • Do not reuse the mop with a shine restorer.
  • Do not use on floors or joints saturated with linseed oil, waxed floors (encaustic) or if the manufacturer advises against alkaline products.
Reference : 471
EAN13 : 3365000004715

Recommended products

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.