Search

Starwax

Ready-to-use green deposit destroyer for roofs, walls and outdoor floors

Ideal for destroying green deposits, lichen and algae on roofs, walls and outdoor floors

Curative action: deep cleansing

Effective from 24 hours, even if it rains the next day

Bleach-free and non-staining

Does not affect the operation of a water recovery system

Can be covered with paint or plaster

Eliminates green deposits, lichens and algae

The ready-to-use Green Deposit Destroyer is ideal for destroying green deposits, lichens and algae for outdoor use on your roofs, walls and outdoor floors. You can also use it for occasional and curative use.

Suitable for outdoor walls, roofs and floorsLe Destructeur de dépôts verts est efficace sur tuiles en terre cuite, dallages en béton, murs de façade...

The Green Deposit Destroyer is effective on all vertical and horizontal, water-resistant surfaces(walls, roofs, outdoor floors, etc.).

The Green Deposit Destroyer can be used on terracotta tiles, concrete paving, facade walls, etc.

It destroys green deposits on concrete, tiles, terracotta, roughcast, aluminium, PVC cladding, plaster, cement, painted cement, polycarbonate, shingles, plastic, zinc, (stainless) steel, slate, fibre cement, stone, brick, plaster, painted surfaces, marble, tiles and wood.

Bleach-free, it won’t stain

Its bleach-free formulation won’t stain roofs, walls or floors. You can then cover the surface with paint or plaster. It will not affect the operation of a water collector.

Disappearance of green deposits, lichen and algae in 24 hours

efficace dès 24hThe Green Deposit Destroyer effectively eliminates green deposits, lichens and algae within 24 hours. It remains active even if it rains the next day.

Made in France

fabriqué-en-franceThis product was designed near Lille, the birthplace of Starwax. And whether it’s made in one of our factories or by one of our subcontractors, it’s been carefully manufactured in France.

How do I use the Starwax green deposit remover?

  • Scrape off thick green deposits beforehand.
  • Apply in dry weather (preferably May to September).
  • Apply to the entire surface to be treated using a garden sprayer, watering can or brush, working from top to bottom, avoiding the lawn and plants.
  • Do not rinse the surface immediately after treatment; leave the product to work until green deposits, lichens and algae have darkened.
  • Remove residues by brushing, sweeping or using a high-pressure cleaner.
  • On very exposed areas or if yellow-orange stains appear, hose off and reapply.
  • For exterior, spot and curative use.

Recommendations

  • Use only for its intended purpose.
  • To stop the biocidal effect, rinse treated surfaces.
  • Repeat the operation in the event of rainfall before the green deposits are completely blackened.
  • Carry out a test on a hidden area to check the reaction of the surface (particularly on painted surfaces).
  • Apply to the surface to be treated evenly and without overloading.
  • Once the product has been applied, the surface may be slippery.
  • Keep pets away during treatment.
    Reference : 1163
    EAN13 : 3365000011638

    Recommended products

    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.